XWU-IMRT Phantom

For MOSFET Dosimeters and Superimposed Film

"A film dosimetry system is not necessary as the film is used to verify the pattern of dose distribution relatively. With five dose points samples on the film and four dose points on an orthogonal plan, this QA procedure is adequate in theory and in practice." (Dr. Wu, University of Miami)

The XWU-IMRT Phantom (TN-RD-52) is ideal for obtaining quantitative dose measurements for film and MOSFET dosimetry. This 20 cm X 20 cm block phantom houses film and nine or more MOSFET dosimeters on two orthogonal planes. One of the planes, containing five MOSFET detection points, is the dividing plane of the two sub-phantoms where a film is housed. Five absolute MOSFET dose points on the plane of the film provide dose verification. Easy to use cassettes come with pre-manufactured slots for the dosimeters and allow for greater versatility.

This product was developed in association with Professor X. Wu, University of Miami, and is manufactured exclusively by Best Medical Canada.

Click here to view the XWU-IMRT Phantom Datasheet (PDF)

Click here to view the XWU Procedure (PDF)

MOSFET Compatible Phantoms

IMRT Phantom manufacturers have created special grooves to accommodate the MOSFET dosimeters. MOSFETs provide precise quantitative dose measurements for IMRT QA.

Med Tec
Standard Imaging
CIRS
Phantom Lab
Sandstrom
3D Line
Modus Med
Capintec